@proceedings {291,
	title = {Field mapping and fracture characterization techniques predict groundwater preferential flow paths in fractured bedrock aquifers, Nashoba Terrane, MA},
	volume = {86},
	year = {2005},
	note = {Accession Number: 2009-053313; Conference Name: American Geophysical Union 2005 fall meeting; San Francisco, CA, United States; Conference Date: 20051205; Language: English; Coordinates: N420800N424400W0710200W0715300; Coden: EOSTAJ; Collation: -1; Publication Types: Abstract Only; Serial; Conference document; Updated Code: 200930; Monograph Title: AGU 2005 fall meeting; Monograph Author(s): Anonymous; Reviewed Item: Analytic},
	month = {2005/12/01/},
	pages = {1477},
	publisher = {American Geophysical Union : Washington, DC, United States},
	edition = {Special supplement},
	address = {United States},
	abstract = {A study examining the relationship between fracture characteristics and groundwater was undertaken in the crystalline Nashoba Terrane of eastern Massachusetts. The Nashoba Terrane, a fault-bounded, highly deformed sliver of Paleozoic igneous and metamorphic rocks, covers an area of 600 sq km about 50 km northwest of Boston. Increasing industrial development coupled with population growth place significant pressure on developers to provide sufficient potable water for the population. To aid water development and management, this study examined fracture characteristics at regional, quadrangle and wellfield scales. The regional-scale work involved recording over 4000 structural measurements from 80 outcrops in the terrane. Fracture information recorded at each data station included strike and dip, trace length, spacing, termination, and fracture type. Preliminary results show that hydrostructural domains can be defined from combinations of fracture characterization and rock types. These domains are used to conceptualize general groundwater flow patterns in the subsurface: steeply dipping fractures, such as partings parallel to foliation enhance recharge potential and impose strong flow anisotropy. A different character is observed if steeply dipping joints intersect sheeting joints. In this instance, both recharge and lateral flow will be enhanced and flow anisotropy will be reduced. The distribution and intensity of particular fracture sets varies as a function of rock type, proximity to major features and local stress states. Partings parallel to foliation are prevalent in gneissic rocks whereas sheeting joints are more common in igneous rocks. Common joints are the most prevalent fractures, present in all rock types across the entire terrane. Quadrangle and wellfield scale data can be used to validate the regional-scale conceptual models. A comprehensive well-yield database was created to test the proposed models. Over 500 water wells in the terrane were evaluated to determine regions with high and low yield. The findings were evaluated in terms of location with respect to newly defined hydrostructural domain maps at both regional and quadrangle scales. Application of these hydrostructural domains in field studies can be useful not only in characterizing fracture intensity and distribution, but can shed more light on the potential of intersecting subsurface zones that could be exploited for economic gain. 

},
	keywords = {$\#$StaffPubs, aquifers, BEDROCK, characterization, fractured materials, fractures, ground water, Hydrogeology 21, mapping, massachusetts, Middlesex County Massachusetts, movement, Nashoba terrane, patterns, preferential flow, recharge, reservoir properties, substrates, United States},
	isbn = {00963941},
	author = {Alex K Manda and Stephen B Mabee and Hubbs, S. A.}
}
@article {274,
	title = {Comparison of three fracture sampling methods for layered rocks},
	journal = {International Journal of Rock Mechanics and Mining Sciences [1997]},
	volume = {47},
	year = {2010},
	note = {Accession Number: 2010-041538; Language: English; Coordinates: N441500N452000W0865600W0880000; Coden: IJRMA2; Collation: 9; Publication Types: Serial; Updated Code: 201023; Illustration(s): illus. incl. 4 tables; Number of References: 25; Reviewed Item: Analytic},
	month = {2010/02/01/},
	pages = {218 - 226},
	publisher = {Elsevier : Oxford-New York, International},
	address = {International},
	abstract = {Three methods of fracture data collection are tested against each other in layered dolomitic rocks to evaluate the effectiveness of each method in sampling fracture properties. The methods tested are the single scanline method (SSM), selection method (SM), and multiple scanline method (MSM). Finite element techniques were first used to build a base model with the exact locations, sizes and orientations of each fracture observed in the natural fracture network. Then, a second set of models were stochastically generated using statistics from each sampling technique. For each network, the overall fracture intensity was used to assess the effectiveness of each sampling technique in capturing the real fracture properties. Fracture network permeability was also calculated for each of two directions to evaluate the transmissive properties of the networks. Although all three methods produced good matches of relative intensity and permeability between natural and synthetic fractures, the results reveal that a well-placed scanline performed the best at recreating natural fractures. However, the results from one variation of the SSM were only slightly better than the results from both versions of the SM. In general, the SSM provides the best results but possibly at heavy costs in time and labor, whereas the SM gives comparable results with less expenditure of energy and time. Thus, the SM is an adequate technique and recommended for use at large outcrops or where time, access or budget constraints are a concern.},
	keywords = {$\#$StaffPubs, Big Quarry, carbonates, case studies, data acquisition, data processing, dolomite, Door Peninsula, fractures, geographic information systems, ground water, information systems, joints, layered materials, mapping, methods, movement, multiple scanline method, northeastern Wisconsin, numerical models, permeability, sampling, selection method, simulation, single scanline method, statistical analysis, Structural geology 16, style, three-dimensional models, United States, Wisconsin},
	isbn = {13651609},
	url = {http://www.sciencedirect.com/science/article/pii/S1365160909001804},
	author = {Alex K Manda and Stephen B Mabee}
}
@article {305,
	title = {Influence of rock fabric on fracture attribute distribution and implications for groundwater flow in the Nashoba Terrane, eastern Massachusetts},
	journal = {Journal of Structural Geology},
	volume = {30},
	year = {2008},
	note = {Accession Number: 2009-050694; Language: English; Coden: JSGEDY; Collation: 14; Publication Types: Serial; Updated Code: 200928; Reviewed Item: Analytic},
	month = {2008/04/01/},
	pages = {464 - 477},
	publisher = {Elsevier : Oxford, International},
	address = {International},
	abstract = {Attributes (i.e. trace-length, spacing, termination and orientation) of joints and foliation-parallel fractures (FPFs) are used to assess the influence of lithology and fabric on fracture type and distribution in metamorphic and igneous rocks of the Nashoba terrane, Massachusetts. Orientations of NE-SW and NW-SE trending joints are consistent throughout the region, whereas FPFs are sub-parallel to the axis of the terrane. Joint spacing generally decreases to the northeast across the terrane reflecting lithologic changes from metamorphic to igneous rock types. Although trace-length and spacing frequency distributions of both joints and FPFs are best described by lognormal functions, FPFs possess narrower fracture spacing than joints. Median fracture trace-lengths of all FPFs are comparable to those of all steep joints, but the median fracture spacing is half that of all steep joints. Trace-lengths of FPFs vary as a function of the degree of development of foliation. Fracture attributes and groundwater flow models suggest that FPFs may significantly increase fracture connectivity and potential for groundwater recharge. FPFs may account for as much as 30\% of flow in fracture networks suggesting that in addition to joints, FPFs play a significant role in groundwater hydraulics that may include imparting flow anisotropy on the groundwater system.},
	keywords = {$\#$StaffPubs, foliation, fractures, ground water, Hydrogeology 21, joints, massachusetts, movement, Nashoba terrane, preferred orientation, statistical distribution, structural analysis, Structural geology, style, terranes, United States},
	isbn = {01918141},
	url = {http://www.sciencedirect.com/science/article/pii/S0191814107002362},
	author = {Alex K Manda and Stephen B Mabee and Donald U Wise}
}
